What the unit is and who it suits

BG SyncEV Grey EV Consumer Unit 100A Main Switch 40A DP RCBO SPD CFEV5RDA-01 is a dedicated EV circuit protection unit intended for charger supplies rather than general-purpose final distribution. It is designed for projects that want a pre-configured board with main isolation, combined RCBO protection and surge protection already fitted for EV use.

The unit suits single-phase EV charger circuits up to 40A where an RCBO arrangement is preferred over a separate RCD and MCB layout. That can make sense where the installer wants the charger circuit protected by one combined overcurrent and residual-current device while still maintaining a main switch incomer and dedicated EV surge protection.

Protection layout and why it matters

BG lists CFEV5RDA-01 as populated with one 100A double-pole main switch, one 40A double-pole Type A RCBO and one Type 2 SPD. That device arrangement is attractive because the RCBO combines overload and earth-leakage protection for the charger circuit, which can simplify fault protection on the final way while still keeping a separate 100A incoming isolator.

Type A RCBO protection is relevant to EV charging because modern charger loads can involve pulsating DC residual currents that require a more suitable protection device than a simple AC-only arrangement. The included Type 2 SPD is also important, since charger circuits increasingly need surge protection as a normal part of the installation standard.

Enclosure construction and environmental suitability

BG states that the enclosure is built from 2mm cast aluminium ADC12, is UV stable and carries an IP65 rating. Published dimensions are 176 x 233 x 100mm. The board includes built-in padlock provision, wire-seal tabs and M20 knockouts that can be drilled up to M32. It is also supplied with a removable cover blank.

For installers, those physical details are more than catalogue filler. EV protection boards are regularly mounted in exposed or semi-exposed positions where weather resistance, secure closure and flexible cable approach all matter. The anthracite grey RAL7016 finish is also useful where a darker enclosure sits more neatly against brick, dark render or timber outbuildings.

Use-case fit and installation logic

CFEV5RDA-01 is best used on a dedicated EV radial where the installer wants a 100A main switch, a 40A double-pole RCBO and surge protection already assembled in one enclosure. That can reduce selection time and help standardise repeat EV installations across similar sites. It also gives a compact arrangement where the protective logic is already aligned to charger use rather than adapted from a general consumer unit.

Because the enclosure is IP65 and cast aluminium, the unit also makes sense for external charger positions where ordinary indoor boards would be the wrong choice.

Warranty and product confidence

BG’s official EV circuit protection literature shows a 10-year warranty for this IP65 enclosure family. That is useful reassurance for a protective component that is expected to remain in service for many years around a fixed EV charger installation.

Why this exact variant may be the right choice

CFEV5RDA-01 is the right choice where the site wants grey-finish IP65 EV protection with a 100A main switch and a combined 40A Type A RCBO layout. It is especially suitable where the installer wants a dedicated EV board that is already configured and ready for outdoor charger protection work.

FAQs

Loading delivery information...