What the unit is and who it suits

BG SyncEV White EV Consumer Unit 40A RCD 40A MCB SPD CFEV5AW-01 is a dedicated EV protection enclosure intended for charger circuits rather than general-purpose distribution. It is designed for sites that want a pre-configured charger protection board with the required protective devices already in place, reducing the amount of manual board-building required during installation.

The unit suits single-phase EV charger circuits up to 40A where the design calls for a separate Type A RCD and B-curve MCB arrangement instead of an RCBO. It is particularly useful on domestic exterior walls, driveway positions, detached garages and light commercial charger points where a tougher, weather-resistant enclosure is needed.

Protection arrangement and buyer implications

BG lists CFEV5AW-01 as populated with one 40A 30mA double-pole Type A RCD, one 40A B-curve MCB and one Type 2 SPD. That arrangement gives separate residual-current and overcurrent protection, which some installers prefer because it keeps the incomer RCD and final-circuit MCB functions distinct. It also provides a clear EV-focused setup without the need to source and assemble separate devices.

The Type A RCD matters because EV charger protection needs to account for pulsating DC residual currents. The integrated Type 2 SPD matters because charger circuits are increasingly expected to include surge protection as part of current best practice.

Enclosure design and finish

BG states that the enclosure is manufactured from 2mm cast aluminium ADC12, is UV stable and carries an IP65 rating. Published dimensions are 176 x 233 x 100mm. The enclosure includes a built-in padlock facility, wire-seal tabs and M20 knockouts drillable up to M32 on multiple faces. Those details make it suitable for external work where cable approach and weather resistance need to be handled cleanly.

The gloss white RAL9016 finish is the main visible difference from the grey version. That matters on lighter render, white brick, painted masonry or cleaner commercial facades where a darker board can stand out more than the customer wants.

Installation fit and use-case logic

CFEV5AW-01 is intended for dedicated EV circuit protection, so it is best used on a radial charger supply rather than as a general-purpose mini board. The fitted 40A B-curve MCB is suited to standard charger circuit protection where higher inrush behaviour is not the main concern. Where the design specifically needs a different protective behaviour, the installer would normally choose the alternative configured unit rather than alter this one unnecessarily.

Because the board is factory configured, it can help standardise repeated EV installs and reduce variation between jobs. That is useful for both trade consistency and long-term maintenance.

Warranty and long-term ownership

BG’s current EV circuit protection literature states a 10-year warranty for this IP65 enclosure family. That supports the product’s role as a fixed protective component expected to remain in service for many years around the EV charger installation.

Why this exact variant may be the right choice

CFEV5AW-01 is the right choice where the project wants the same protective arrangement as the grey model but in a cleaner white finish. It is particularly appropriate on lighter external walls and installations where the client cares about the visual impact of the protection board as well as the technical specification.

FAQs

Loading delivery information...