What the Growatt APX Power Module 1PH (SP) does

The Growatt APX Power Module 1PH (SP) is the battery control unit that sits at the heart of a compatible single-phase APX storage system. In Growatt’s own APX HV Battery S0 documentation, this unit is identified as the APX 55027-P0 power module used in the APX 5.0-30.0P-S0 system for MIN 2500-6000TL-XH inverters. In practical terms, that means it is the part that enables the inverter and the battery stack to work together as a complete storage system.

Without the correct power module, an APX battery stack is incomplete. With it, the system gains the control, communication and monitoring layer needed to manage charging, discharging and battery status properly. For buyers building a Growatt single-phase storage system, this is not an optional add-on. It is a fundamental part of the official system architecture.

Who it suits

This power module suits homeowners, installers and specifiers building a single-phase Growatt APX HV battery system around the MIN 2500-6000TL-XH range. It is especially relevant where the project is being designed as a staged solar-to-storage installation. A customer may begin with solar and battery-ready hardware, then add storage in a more measured way. The APX 1PH power module makes that route practical while keeping the installation inside Growatt’s verified compatibility path.

It also suits properties where modularity matters. Growatt’s APX S0 system supports 5kWh to 30kWh flexible capacity, so the same core platform can serve smaller homes, growing households or properties planning extra electrification later.

Verified technical role in the APX S0 system

Growatt’s official APX HV Battery-S0 (MIN-XH) datasheet identifies the power module as APX 55027-P0. The datasheet shows it as the required control unit for systems using APX 5.0P-B1 battery modules with MIN 2500-6000TL-XH inverters. The same document confirms the following key data for the power module itself:

• Power module model: APX 55027-P0
• Compatible inverters: MIN 2500-6000TL-XH
• Maximum charge/discharge power: 6.2kW
• Maximum current: 17A
• Peak current: 27A for 60 seconds
• Communication: CAN/RS485
• Dimensions: 690 × 185 × 220mm
• Weight: 10kg
• Protection level within the system datasheet: IP66 system architecture

Growatt also confirms that the whole APX S0 system provides monitoring for SOC, system voltage, current, cell voltage, cell temperature and PCBA temperature. That is important in day-to-day ownership because it means the power module is doing far more than simply passing energy through. It is an active system control component.

Why it matters in practice

For a residential storage system to feel dependable, the inverter needs clean and accurate communication with the batteries. The APX 1PH power module provides that. It also supports the modular design logic that makes the APX platform attractive. Growatt’s official APX HV Battery page highlights module-level energy optimisation, the ability to mix new and old battery modules, and flexible expansion through the broader APX architecture.

That matters because real storage systems evolve. A household may install 5kWh or 10kWh first, then expand later once usage patterns become clearer. The Growatt APX platform is designed for exactly that kind of practical expansion, and the power module is the component that makes the battery stack function as a controlled, monitored and inverter-compatible system.

Installation and system design considerations

The official Growatt energy storage configuration material shows the single-phase APX HV path pairing APX 55027-P0 with APX 5.0P-B1 battery modules for 1 to 6 modules. It also references supporting accessories such as the APX Battery Base and, where needed, the APX 5.0P-B1 parallel extension cable for certain layouts.

That tells you two useful things. First, the module is intended for proper system builds, not improvised battery combinations. Second, the wider APX platform is clearly designed to support structured expansion and tidy installation practice. For UK residential installs, that is valuable because it keeps the storage project cleaner to specify and easier to support later.

Why this single-phase version is the right choice

Growatt also offers three-phase APX power module options, but this 1PH (SP) unit is the correct choice where the inverter platform is MIN 2500-6000TL-XH. That is the defining point. If the installation is single phase and the customer wants the official Growatt APX HV route, this is the correct battery control module for the job.

Compared with stepping outside the official ecosystem, using the correct power module helps preserve compatibility, cleaner commissioning and clearer support. For installers, that means fewer avoidable issues. For owners, it means a better chance of getting the performance expected from the APX storage platform.

Best-fit applications

• Single-phase homes building a Growatt APX storage system
• MIN-XH battery-ready inverter installations
• Phased storage projects from 5kWh to 30kWh
• Residential systems prioritising official Growatt compatibility

FAQ