What the product is and who it suits

SolaX Triple Power TP-HS36 is the 3.6kWh battery module used in the T-BAT-SYS-HV-S3.6 platform. It is not a complete battery system by itself, because the architecture also depends on the correct battery management unit and, for larger layouts, the Series Box. What this product provides is the individual LFP module that builds the wider stack.

This makes it a good choice for homes and similar sites where the buyer wants high-voltage storage but does not want a fixed-capacity battery with limited growth potential. A modular battery platform lets the owner start with a capacity that suits the current project and then add more later if usage patterns, tariffs or electrical loads change.

The TP-HS36 is especially appealing because the official SolaX documentation gives a very clear view of how the platform scales. The product page states a capacity range from 7.3kWh to 47.9kWh, while the datasheet shows the corresponding system figures for different stack sizes. That is the kind of structure installers need when building a battery system around real project requirements rather than guesswork.

Key features and practical benefits

The official datasheet lists TP-HS36 as an LFP battery module with 3.6kWh capacity, 510 × 152 × 365mm dimensions and 34kg net weight. The same document lists CAN2.0 / RS485 communication, IEC62619, IEC60730, IEC62040, CE, UN38.3 and UL9540A-related certification references, plus IP65 protection at system level.

The published system data for the T-BAT-SYS-HV-S3.6 platform is equally useful. SolaX lists 90% depth of discharge, 35A recommended charge and discharge current, 50A maximum charge and discharge current and more than 6000 cycles. System capacity begins at 7.3kWh and runs up to 47.9kWh, with usable energy figures also published across the range. That is a strong technical base for a storage platform intended for routine daily use.

For the customer, the biggest benefit is flexibility. The same battery family can suit a modest domestic system or a much larger storage-led installation. That means the platform does not have to be abandoned just because site needs increase.

• 3.6kWh LFP battery module for the HS36 system architecture
• System scaling from 7.3kWh to 47.9kWh
• 90% depth of discharge and over 6000 cycles
• 35A recommended and 50A maximum charge/discharge current
• CAN2.0 / RS485 communication interfaces
• IP65 protection at system level

System growth and architecture

One of the strongest reasons to choose the TP-HS36 is the published range of supported system sizes. The official SolaX product page states 7.3kWh to 47.9kWh total capacity, and the datasheet breaks this down across multiple module counts. That gives buyers and installers a clear route from a smaller starting system into a much larger long-term storage setup.

The datasheet also lists the matching BMS route as TBMS-MCS0800 and provides Series Box dimensions alongside the battery module and BMS dimensions. That matters because it shows the TP-HS36 sits inside a complete, documented system architecture rather than being an isolated battery block with vague accessory requirements.

Compatibility pathways are also wider than one inverter family. The Italian SolaX product resource page lists HS36 combinations with X1-Hybrid G4, X3-Hybrid G4 and X3-Ultra documentation, which helps confirm that the battery sits in a broader current-generation SolaX ecosystem. For customers, that means the platform can support a range of residential and larger hybrid designs rather than being locked to one narrow route.

Installation, protection and daily use

SolaX lists IP65 protection for the T-BAT-SYS-HV-S3.6 system, which is important because batteries are often installed in service spaces, garages and plant areas rather than ideal climate-controlled rooms. The module itself remains compact enough at 510 × 152 × 365mm and 34kg to work well in modular stacks without becoming impractical to plan around.

The product page also highlights stackable modules and plug-and-play design, which is relevant for both installers and end users. Expansion is easier when a battery platform is mechanically and electrically designed around clean modular growth rather than improvised add-ons.

For daily operation, the more than 6000-cycle design life and 90% depth of discharge matter because they support real energy shifting rather than occasional emergency use only. This is the kind of battery platform that makes sense for owners who want to store solar production regularly, respond to time-of-use tariffs and reduce imported electricity over the long term.

Why this variant may be the right choice

The TP-HS36 is the right choice when the project wants the S3.6 platform rather than the larger 5.1kWh IES-style route or the TP58 master/slave system. It is especially useful where the buyer wants a modular high-voltage battery with a wide published expansion range and good inverter compatibility across established SolaX hybrid families.

It is also attractive for buyers who want long-term flexibility without jumping straight to a very large storage system. Because the platform is modular, the system can be built in stages while remaining inside the same documented family.

FAQs

Loading delivery information...