What the product is and who it suits

SolaX X3 Ultra 25kW is a three-phase commercial and industrial hybrid inverter for larger solar-and-storage installations where the brief goes beyond basic solar conversion. SolaX positions the X3 Ultra range as a three-phase C&I hybrid inverter family, and that matters because the platform is built for demanding projects where solar generation, battery storage, backup capability and future system expansion all need to be considered together.

In practical terms, the 25kW version suits larger commercial buildings, agricultural sites, workshops, energy-hungry mixed-use premises and bigger properties with genuine three-phase infrastructure. It is especially relevant where the PV field is larger and the array design benefits from more than two MPPT channels.

Key features and practical benefits

SolaX lists the X3-ULT-25K with 25,000W rated output power, up to 50kWp recommended PV array power, 3 MPPTs with 2/2/2 strings and 36A maximum input current per MPPT. Those figures make it a stronger fit for larger arrays than the 20kW variant when the roof or ground-mount layout is divided into more distinct string groups.

SolaX also highlights up to 200% PV oversizing and up to 110% AC output across the X3 Ultra platform. On larger commercial sites, that matters because PV sizing is rarely driven by one fixed ratio. The ability to design with more DC headroom helps the project make better use of available module space while still staying inside a controlled inverter platform.

The battery side is equally important. The official datasheet lists lithium battery compatibility, a 120 to 800V battery voltage range and 60A maximum charge and discharge current. SolaX guidance also confirms that the X3 Ultra can work with one or two battery strings depending on the battery solution chosen. This makes it a genuine storage-led platform rather than a PV inverter with only light battery support.

• 25,000W rated three-phase output
• Up to 50kWp recommended PV array power
• 3 MPPTs with 2/2/2 string arrangement
• 36A maximum input current per MPPT
• 120 to 800V battery operating range
• 60A maximum charge and discharge current
• UPS-level switchover in under 10ms

Technical detail that matters in practice

The X3 Ultra platform is built for harder-working environments than most residential hybrids. SolaX lists IP66 ingress protection, Type II surge protection on the AC and DC side and optional AFCI. Those features matter because commercial and mixed-use sites often need greater confidence in environmental protection and integrated safety before the wider system design even reaches procurement stage.

The 25kW model is listed with dimensions of 696 x 526 x 240mm, 98.0% maximum efficiency and 97.7% European efficiency. That gives the inverter a serious but still wall-mounted form factor, with strong conversion performance for a hybrid inverter in this class.

SolaX also highlights built-in shadow tracking, smart loads management, load response within 0.3 seconds, microgrid and generator function, and VPP readiness with multiple compatibility standards. Those features give the inverter real value on sites with changing demand patterns and a stronger need to control how solar and stored energy are used.

Battery compatibility and system growth

Official SolaX battery guidance for X3 Ultra states that the inverter can be matched with HS25, HS36, HS51, T58 and T30 battery routes. That shows the platform is intended to sit at the centre of a wider SolaX storage ecosystem rather than depending on one narrow battery path.

Within the approved LAMPS range, relevant pairings include SolaX Triple Power TP-HS36 battery modules, SolaX Triple Power TP58 batteries, SolaX TP58 BMS Parallel Box G2 and the SolaX Triple Power Series Box for TP-HS25 and TP-HS36 batteries. Those are particularly relevant on a 25kW three-phase inverter because projects at this size are more likely to place storage at the centre of the commercial case.

SolaX also states that the X3 Ultra supports up to 10 units in parallel for both on-grid and off-grid systems. That matters because it gives genuine expansion potential for sites that may grow in stages rather than locking the design into a single-unit ceiling.

Why this variant may be the right choice

The X3-ULT-25K is a strong next step up from the 20kW version where a site needs more PV design flexibility, a larger solar field and the advantage of a third MPPT. That can make a noticeable difference on more segmented roofs, multi-building layouts and broader commercial arrays where a two-tracker design would force more compromise.

It is also a good fit where the project needs more headroom but does not yet justify the full scale of the 30kW model. For many larger commercial and agricultural sites, the 25kW version lands in a very useful middle ground between capacity, flexibility and system complexity.

FAQs

Loading delivery information...