⚡ Fast dispatch from UK stock
💷 Trade accounts available
💬 EV, solar & heating specialists
You have no items in your shopping cart.
My Quotes

Ideal for

  • Homeowners with a charger close to the parked car
  • Standard driveways and garages
  • Buyers who want a neutral charger finish
  • Solar or smart-tariff households

Works well with

  • Hypervolt app
  • Octopus Intelligent Go
  • OVO Charge Anytime
  • Solar PV systems

Hypervolt Home 3 Pro Space Grey 5m for a balanced fit on many homes

Hypervolt Home 3 Pro Space Grey 5m is a 7.4kW single-phase tethered EV charger for buyers who want connected home charging, solar-aware modes and the convenience of a fixed lead in a finish that suits a wide range of properties. It combines a permanently attached 5-metre Type 2 cable with the current Home 3 Pro platform, which includes app control, connected scheduling and solar charging capability.

Across the Home 3 Pro range, the main decisions are cable length and finish. On this variant, the 5m cable is aimed at straightforward parking layouts, while the Space Grey finish gives a more neutral look than the Ultra White and Ultra Black versions. That makes it a useful choice on mixed brick, render or cladding where either a very light or very dark charger would stand out more than you want.

Because the cable is fixed to the charger, daily charging stays simple. You do not need to fetch and store a loose lead each time. That helps turn home charging into a quick routine instead of a repeated setup task.

Why the 5m cable length still matters

A standard-length tethered lead is often the best fit for normal home layouts. The 5m Home 3 Pro gives enough reach for many driveways and garages without leaving unnecessary cable to wrap and store. That can make the area around the charger easier to keep tidy, especially in narrower spaces.

Longer leads are useful where the wall position or vehicle inlet demands them, but where the layout is already simple, extra cable is not always an advantage. That is why the 5m version remains a distinct, practical option in the range rather than a stripped-back placeholder.

For households with a consistent parking position, the 5m cable gives the convenience of a tethered setup without additional slack.

App control, scheduling and tariff support

Home 3 Pro is designed around connected control via the Hypervolt app. The app provides access to charging schedules, usage records, lock controls and settings. Bluetooth is used during setup, while WiFi or a wired Ethernet connection can be used for ongoing connected functions.

That connection supports more than basic time settings. Hypervolt also supports Octopus Intelligent Go and OVO Charge Anytime activation through the relevant apps, which helps make the charger useful for lower-cost charging routines as well as simple app-based scheduling.

LED status lighting is also part of the Home 3 Pro feature set, and selectable LED brightness and modes can help the charger sit more discreetly on the wall where needed.

Solar charging modes and CT clamp support

Hypervolt lists Eco and Super Eco modes on Home 3 Pro, giving the charger a clear role in homes with solar PV. The installation documentation confirms that a CT clamp is supplied and used to measure the main property load and discover solar export, which is what allows the charger to respond to available surplus energy.

In day-to-day terms, Eco mode can use a mix of grid and solar electricity, while Super Eco is intended to prioritise surplus solar. That makes the charger useful across different weather conditions and seasons rather than only when solar output is high.

Automatic load management is also included in the platform feature set, helping the charger respond when household demand rises.

Build quality, protection and installation relevance

Hypervolt’s current technical sheet lists Home 3 Pro as a 7.4kW, 32A, 230V single-phase charger with WiFi, Ethernet and Bluetooth. It also lists IP66 ingress protection and IK10 impact resistance. Those are the practical build details most buyers care about when comparing outdoor home chargers.

The installation guide confirms the supplied CT clamp and built-in PEN fault protection, both of which are relevant at installation stage. Final circuit arrangement and protective device selection still depend on the electrician and site conditions, but the charger is clearly designed with UK domestic installation in mind.

Hypervolt’s warranty information also confirms 3 years warranty as standard for Home 3 Pro, which is the core verified warranty position for this variant.

Who this variant suits best

The Space Grey 5m version is especially well suited to buyers who want a neutral charger finish, a standard tethered cable length and the convenience of a fixed lead on a routine home installation. It is a good fit for properties where the charger sits against mixed tones and materials rather than very dark or very light walls.

Compared with the 7.5m and 10m versions, this model is the tidier choice when more reach is not needed. It keeps the same Hypervolt platform, but in the cable length and colour that suit a simpler home layout.

Frequently asked questions

Is Home 3 Pro single-phase?

Yes. Home 3 Pro is a 7.4kW, 32A single-phase AC charger.

Does this version have a fixed 5m cable?

Yes. This exact variant is the tethered Type 2 version with a permanently attached 5-metre lead.

Can it work with solar panels?

Yes. Hypervolt lists Eco and Super Eco modes, and the supplied CT clamp allows the charger to measure main load and solar export.

How does it connect to the app?

Bluetooth is used during setup, and the charger supports WiFi or Ethernet for connected use afterwards.

What warranty does it include?

Hypervolt states 3 years warranty as standard for Home 3 Pro.

Products specifications

Attribute name Attribute value
Dimensions 170 x 200 x 100mm
Weight 4.3Kg (excluding wall bracket)
Colour Black (RAL 9005)
Model Libbi-EK101
Warranty 10 years
Charging connector Type 2 (standard) / Type 1 (option)
Connection capacity Single-Phase, 7kW AC
Cable Length 5.0m (standard), 7.5m and 10.0m available
Enclosure hardness rating IK10
Mounting type Wall/Pole mounted
Ingress protection IP66
Dynamic load management Yes
Country of manufacture United Kingdom
Wall mounting plate IP66 clamshell with LEDSafe Connector

Loading delivery information...

Request a Quote