⚡ Fast dispatch from UK stock
💷 Trade accounts available
💬 EV, solar & heating specialists
You have no items in your shopping cart.
My Quotes

Ideal for

  • Homes where 5m is slightly too short
  • Offset bays and wider driveways
  • Buyers who want a neutral charger finish
  • Solar or smart-tariff households

Works well with

  • Hypervolt app
  • Octopus Intelligent Go
  • OVO Charge Anytime
  • Solar PV systems

Hypervolt Home 3 Pro Space Grey 7.5m for the middle ground between 5m and 10m

Hypervolt Home 3 Pro Space Grey 7.5m is a 7.4kW single-phase tethered EV charger built for buyers who want more flexibility than the standard 5m model gives, but who do not need the maximum 10m reach of the longest Home 3 Pro variants. It combines a permanently attached 7.5-metre Type 2 cable with the current Hypervolt connected charging platform and a neutral Space Grey finish that suits a wide range of properties.

Across the Home 3 Pro range, the hardware platform stays the same. That means the key differences between variants are how the lead length works on the property and how the chosen finish sits visually on the wall. In this case, the 7.5m cable is the practical feature most buyers are choosing, while the Space Grey casing gives a more neutral look than either Ultra White or Ultra Black.

That makes this variant especially useful on homes with mixed materials or mid-tone exteriors, and on sites where the car does not always park in the same position every day.

Why 7.5m often feels like the most useful extra reach

The advantage of a 7.5m tethered lead is that it solves many common layout problems without taking you all the way to a 10m cable. That can be important if the wall position is offset from the charging port, if the lead needs to pass around the far side of the vehicle, or if the charger is mounted to the side of a garage entrance rather than directly beside the car.

Compared with the 5m version, this variant gives more freedom over parking position and charger placement. Compared with the 10m version, it usually leaves less spare cable to store when the site needs more reach but not the maximum possible amount.

For many homes, that makes 7.5m the most practical compromise between flexibility and tidiness.

App control, schedules and tariff support

Home 3 Pro is designed for connected use through the Hypervolt app. The app gives access to charging schedules, usage records, lock controls and charger settings, helping the charger fit a wide range of daily routines. Bluetooth is used during adoption and setup, while WiFi or a wired Ethernet connection can be used for ongoing connected features.

Hypervolt also supports Octopus Intelligent Go and OVO Charge Anytime activation through the relevant apps, which helps the charger fit time-of-use charging strategies where supported as well as standard scheduled charging through the Hypervolt platform.

LED status lighting is part of the Home 3 Pro feature set too, and selectable LED brightness and modes help keep the charger more discreet when it is mounted in visible areas.

Eco and Super Eco solar charging modes

Hypervolt lists Eco and Super Eco charging modes for Home 3 Pro, and its installation documentation confirms that a CT clamp is supplied. That clamp is used to measure the main property load and discover solar export, which is what allows the charger to respond to available surplus energy.

In practical terms, Eco mode can use a mix of solar and grid electricity, while Super Eco is intended to prioritise surplus solar generation. That makes the charger useful in solar-equipped homes across changing weather conditions and seasons, rather than only when generation is consistently high.

Automatic load management is also part of the Home 3 Pro feature set, which helps the charger respond when household demand rises.

Build quality, protection and installation relevance

Hypervolt’s current technical sheet lists Home 3 Pro as a 7.4kW, 32A, 230V single-phase charger with WiFi, Ethernet and Bluetooth. It also lists IP66 ingress protection and IK10 impact resistance, along with cable options of 5m, 7.5m and 10m. Those are the specification details that matter most when comparing it with other home chargers.

The installation guide confirms the supplied CT clamp and built-in PEN fault protection. That helps simplify domestic installation planning, although final circuit design and protective device choice still depend on the electrician and the site.

Hypervolt’s warranty information also confirms 3 years warranty as standard for Home 3 Pro, which is the core verified warranty position for this variant.

Who this variant suits best

The Space Grey 7.5m version is especially well suited to households where extra cable reach would make daily charging easier, but where the longest 10m lead is not required. It is also a strong fit for buyers who want a neutral charger finish that blends across a wider mix of exterior tones and materials.

Compared with the 5m version, this model gains more freedom in daily parking. Compared with the 10m version, it stays easier to keep tidy when the site needs extra reach but not the full maximum length.

Frequently asked questions

Is Home 3 Pro single-phase?

Yes. Home 3 Pro is a 7.4kW, 32A single-phase AC charger.

Does this version include a fixed 7.5m cable?

Yes. This exact variant is the tethered Type 2 version with a permanently attached 7.5-metre lead.

Can it work with solar panels?

Yes. Hypervolt lists Eco and Super Eco modes, and the supplied CT clamp is used to measure main load and solar export.

How does it connect?

Bluetooth is used during setup, and the charger supports WiFi or Ethernet for connected use afterwards.

What warranty does it include?

Hypervolt states 3 years warranty as standard for Home 3 Pro.

Products specifications

Attribute name Attribute value
Dimensions 170 x 200 x 100mm
Weight 4.3Kg (excluding wall bracket)
Colour Black (RAL 9005)
Model Libbi-EK101
Warranty 10 years
Charging connector Type 2 (standard) / Type 1 (option)
Connection capacity Single-Phase, 7kW AC
Cable Length 5.0m (standard), 7.5m and 10.0m available
Enclosure hardness rating IK10
Mounting type Wall/Pole mounted
Ingress protection IP66
Dynamic load management Yes
Country of manufacture United Kingdom
Wall mounting plate IP66 clamshell with LEDSafe Connector

Loading delivery information...

Request a Quote