Hypervolt Home 3 Pro Ultra White 10m for maximum cable reach at home

Hypervolt Home 3 Pro Ultra White 10m is a 7.4kW single-phase tethered EV charger for properties where the parking layout demands the longest available lead in the Home 3 Pro range. It combines a permanently attached 10-metre Type 2 cable, app-based connected charging, solar-aware modes and the Ultra White finish in a format built for longer and less predictable home charging layouts.

The main reason to choose this exact variant is simple: reach. The 10m Home 3 Pro is intended for situations where a 5m or 7.5m cable may still leave too little flexibility. That can include long driveways, detached garages, side-wall mounting positions, offset parking or vehicles whose charging inlet sits awkwardly relative to the charger location. In those situations, the longest tethered lead in the range can remove a lot of daily hassle.

The Ultra White finish also makes this model a cleaner visual fit on lighter exteriors, especially where the charger is more visible on the property and a darker unit would stand out more heavily.

Why the 10m cable changes what layouts are possible

Cable length matters more on a real driveway than it does on a spec sheet. The 10m version gives the most freedom over charger placement and vehicle position in the Hypervolt Home 3 Pro range. That can make a real difference where the charger needs to be mounted where the electrical route suits the property, rather than exactly where the car’s charging port would ideally be.

That longer lead is useful when the cable needs to pass around the front or rear of the vehicle, when more than one parking position may be used, or when detached garage and side-return layouts create a longer path to the inlet than a shorter lead can comfortably handle. It can also reduce the need to park in one exact position every day.

The trade-off is that there is naturally more cable to store than on the shorter versions. Even so, when the site genuinely needs the reach, the 10m model is the cleanest way to keep the convenience of a tethered charger.

App control, schedules and tariff support

Home 3 Pro is designed to work as a connected charger through the Hypervolt app. The app gives access to schedules, usage records, lock controls and charger settings, making it easier to adapt the charger to everyday home use. Bluetooth is used during setup, while WiFi or Ethernet can be used for ongoing connected features.

For buyers on time-of-use tariffs, Hypervolt also supports Octopus Intelligent Go and OVO Charge Anytime activation through the relevant apps. That gives the charger a clear role in lower-cost home charging where supported, as well as standard app-based scheduling.

LED status lighting is also part of the Home 3 Pro feature set, and selectable LED brightness and modes help the charger sit more discreetly when it is installed in visible locations.

Eco and Super Eco solar charging modes

Hypervolt lists Eco and Super Eco charging modes for Home 3 Pro, and the installation guide confirms that a CT clamp is supplied with the charger. That clamp is fitted to measure the main property load and discover solar export, which is what enables the charger’s solar-aware behaviour.

In practical use, Eco mode can use a mix of solar and grid electricity, while Super Eco is intended to prioritise surplus solar. That makes the charger useful for solar-equipped homes while still keeping it fully practical as a normal smart wallbox on low-generation days.

Automatic load management is also part of the platform feature set, which adds another useful layer when household demand changes.

Build quality, protection and installation relevance

Hypervolt’s current technical sheet lists Home 3 Pro as a 7.4kW, 32A, 230V single-phase charger with WiFi, Ethernet and Bluetooth. It also lists IP66 ingress protection and IK10 impact resistance, alongside cable options of 5m, 7.5m and 10m. Those are the build and connectivity details most buyers need when comparing variants.

The installation guide confirms the supplied CT clamp and built-in PEN fault protection. That helps simplify domestic installation planning, although final circuit design and protection choice still depend on the electrician and the site conditions.

Hypervolt’s warranty information also confirms 3 years warranty as standard for Home 3 Pro, which is the core verified warranty position for this variant.

Who this variant suits best

The Ultra White 10m version is especially well suited to homes where cable reach is the main challenge, including longer driveways, detached garages and offset parking positions. It is also a strong fit for lighter exteriors where the charger is clearly visible and finish choice matters.

Compared with the 5m and 7.5m versions, this model is the right choice when flexibility and reach matter more than keeping the tethered lead as short as possible.

Frequently asked questions

Loading delivery information...